HX2272 Remote decoder circuit: Difference between revisions

From Yggenyk
Jump to navigation Jump to search
No edit summary
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:English pages]]
[[Category:English pages]]
<google>ENGELSK</google>
[[Category:Electronics]]
* [http://www.datasheetcatalog.net/cgi-bin/helo.pl?text=PT2272 HX2272 is equivalent to PT2272 - datasheet here]
[[Category:Elektronik]]
 
<google>HX2262-HX2272</google>
HX2272 is equivalent to PT2272
* [[Remote controlled switch with HX2262 and HX2272]] look what's inside.
* [http://www.princeton.com.tw/downloadprocess/downloadfile.asp?mydownload=PT2272_1.pdf PT2272 Datasheet]
* [http://www.datasheetcatalog.net/cgi-bin/helo.pl?text=PT2272 PT2272 Application note]
==1. Description==
==1. Description==
HX2272 / 2262 is a remote control for decoding circuit. The chipset using CMOS technology. The pin-site data and coding through a serial code for the application of RF or IR model. HX2272 have up to three of the 12-bit address pins provide 531,441 addresses code, which greatly reduce any wrong code and the possibility Series yards. Meanwhile HX2272 counterpart different applications have different options: multiple data output pin; Latch output; Instant output.  
HX2272 is a remote control decoder for decoding signals encoded by the [[HX2262 Remote encoder circuit]].
The chipset is using CMOS technology.
It has 12 bits of tri-state address pins providing a maximum of 531,441 (or 312) address codes; thereby, drastically reducing any code collision and unauthorized code scanning possibilities.
HX2272 is available in several options to suit every application need : variable number of data output pins, latch or momentary output type.


==2. Features==
==2. Features==
*Low-power CMOS technology
*Low-power CMOS technology
*SNR up to 12 three-pin-code addresses can
* Low SNR
* 6 Data-pin wide
* Up to 12 Tri-State code addresses pins
* Up to 6 Data pins
*Operating voltage range: 3 to 18V  
*Operating voltage range: 3 to 18V  
*Instantaneous output latch
*Instantaneous output latch
*DIP package
*DIP package
*RC oscillator  
*RC oscillator


==3 Applications==
==3 Applications==
Line 33: Line 41:
|A0 ~ A5
|A0 ~ A5
|I
|I
!colspan="2"|# # 0 -5 yards address pins. HX2272 3 through 6 of this state of the pin to determine bit0 - bit5 coding waveform. Each pin respectively were home to "0" and "1" or "f" (vacant)
!colspan="2"|
Code Address Pin Nos. 0 ~ 5.
These six tri-state pins are detected by HX2272 to
determine the encoded waveform bit 0 ~ bit 5.
Each pin can be set to “0”, “1”, or “f” (floating).
|-
|-
|7 ~ 8 10 ~ 13
|7 ~ 8<br>10 ~ 13
|A6/D5 ~ A11/D0
|A6/D5 ~ A11/D0
|I/O
|I/O
!colspan="2"|# 6 # 11 yards address pins or # 5 # -0 data output pin. According to the different specifications HX2272 suffix, as a high six-pin code can address pins can be used as data output pin. When these pins used as a pin-code addresses, each pin can be home to "0" and "1" or "f" (vacant). When used as a data output pins, at the same time comply with the following two conditions under the premise of output "1" (Vcc), or "0" (Vss). (1), accepted by the address coding and code addresses waveform input settings matching;
!colspan="2"|
(2), corresponding to the receiver of the data output for the home, "one."
Code Address Pin Nos. 6 ~ 11/Data Pin Nos. 5 ~ 0.
These six pins are used as higher address input
bits or data output pins depending on the version
(type) of HX2272 used.
When used as address inputs, these pins are
tri-state input pins and each pin can be set to “0”,
“1”, or “f” (floating).
When used as output pins, these pins are driven to
VCC if (1) the address decoded from the waveform
that was received matches the address setting at
the address input pins, and (2) the corresponding
data bits received is a “1” bit. Otherwise, they are
driven to VSS.
|-
|-
|14
|14
|DIN
|DIN
|I
|I
!colspan="2"|Data input pins, receive encoded signals from the pin serial input.
!colspan="2"|
Data Input Pin.
The encoded waveform received is serially fed to
HX2272 at this pin.
|-
|-
|15
|15
|OSC1
|OSC1
|I
|I
|An external oscillator section points.
|
Oscillator Pin No.1
| rowspan=2 style="border-bottom:3px solid grey;" valign="top" |
| rowspan=2 style="border-bottom:3px solid grey;" valign="top" |
This two - one external resistor to determine the basic HX2272 oscillation frequency.
A resistor connected
between these two pins determine the determine the basic HX2272 oscillation frequency.
|-
|-
|16
|16
|OSC2
|OSC2
|O
|O
|The second external oscillator points.  
|
Oscillator Pin No.2
|-
|-
|17
|17
|VT
|VT
|O
|O
!colspan="2"|Effective transfer, terminated effective. When HX2272 receipt of a valid signal, VT into terminated.
!colspan="2"|
Valid Transmission.
Active High Signal. VT in high state signifies that
HX2272 receives valid transmission waveform.
|-
|-
|18
|18
|Vcc
|Vcc
| --
| --
!colspan="2"|Power
!colspan="2"|Power positive
|-
|-
|9
|9
Line 79: Line 112:
[[Image:HX2272 application.jpg]]
[[Image:HX2272 application.jpg]]


<google>ENGELSK</google>
<google>HX2262-HX2272</google>

Latest revision as of 11:02, 30 August 2008

<google>HX2262-HX2272</google> HX2272 is equivalent to PT2272

1. Description

HX2272 is a remote control decoder for decoding signals encoded by the HX2262 Remote encoder circuit. The chipset is using CMOS technology. It has 12 bits of tri-state address pins providing a maximum of 531,441 (or 312) address codes; thereby, drastically reducing any code collision and unauthorized code scanning possibilities. HX2272 is available in several options to suit every application need : variable number of data output pins, latch or momentary output type.

2. Features

  • Low-power CMOS technology
  • Low SNR
  • Up to 12 Tri-State code addresses pins
  • Up to 6 Data pins
  • Operating voltage range: 3 to 18V
  • Instantaneous output latch
  • DIP package
  • RC oscillator

3 Applications

  • Car security system home security / automation system
  • Garage door controller
  • Fans remote home security / automation systems
  • Industrial remote control
  • Toys with remote control

4. Pinout

Pinout
18-lead package
Pin name Input/Output Note
1 ~ 6 A0 ~ A5 I

Code Address Pin Nos. 0 ~ 5. These six tri-state pins are detected by HX2272 to determine the encoded waveform bit 0 ~ bit 5. Each pin can be set to “0”, “1”, or “f” (floating).

7 ~ 8
10 ~ 13
A6/D5 ~ A11/D0 I/O

Code Address Pin Nos. 6 ~ 11/Data Pin Nos. 5 ~ 0. These six pins are used as higher address input bits or data output pins depending on the version (type) of HX2272 used. When used as address inputs, these pins are tri-state input pins and each pin can be set to “0”, “1”, or “f” (floating). When used as output pins, these pins are driven to VCC if (1) the address decoded from the waveform that was received matches the address setting at the address input pins, and (2) the corresponding data bits received is a “1” bit. Otherwise, they are driven to VSS.

14 DIN I

Data Input Pin. The encoded waveform received is serially fed to HX2272 at this pin.

15 OSC1 I

Oscillator Pin No.1

A resistor connected between these two pins determine the determine the basic HX2272 oscillation frequency.

16 OSC2 O

Oscillator Pin No.2

17 VT O

Valid Transmission. Active High Signal. VT in high state signifies that HX2272 receives valid transmission waveform.

18 Vcc -- Power positive
9 Vss -- Power negative

HX2272 package.jpg HX2272 pinout.jpg

HX2272 application.jpg

<google>HX2262-HX2272</google>

id=siteTree