Codecs
<google>ENGELSK</google>
General
- List of codecs - Wikipedia, the free encyclopedia
- Intel® Integrated Performance Primitives
- Intel® IPP: Implementing Wideband Codec VoIP Solutions (including sample code)
Audio codecs
- ITU Codecs and sourcecode
- Recommendation G.711.1 (03/08) + sourcecode
- Download Open Source G.729 (g729) and G.723.1 (g723) diff codec_g729 codec_g729a codec_g723 for Asterisk Linux
- ITU G.729 - voip-info.org
- Free G729 Acm Codec Diver - Plugin codec for RTC Sip softphone
- G.729 : Coding of speech at 8 kbit/s using conjugate-structure algebraic-code-excited linear prediction (CS-ACELP)
- List of codecs - Wikipedia
- G.711 - Wikikpedia
- RTP Payload Format for ITU-T Recommendation G.711.1 draft-ietf-avt-rtp-g711wb-03
Documents from ITU
- 3 documents G.711 : Pulse code modulation (PCM) of voice frequencies
- ITU-T Recommendation G.711 - (STD.ITU-T RECMN G.711-ENGL 1989)
5 Relationship between the encoding laws and the audio level The relationship between the encoding laws of Tables 1/G.711 and 2/G.711 and the audio signal level is defined as follows: A sine-wave signal of 1 kHz at a nominal level of 0 dBm0 should be present at any voice frequency output of the PCM multiplex when the periodic sequence of character signals of Table 5/G.711 for the A-law and of Table 6/G.711 for the m-law is applied to the decoder input. The resulting theoretical load capacity (Tmax) is +3.14 dBm0 for the A-law, and +3.17 dBm0 for the m-law. Note - The use of another digital periodic sequence representing a nominal reference frequency of 1020 Hz at a nominal level of -10 dBm0 (preferred value, see Recommendation O.6) or 0 dBm0 is acceptable, provided that the theoretical accuracy of that sequence does not differ by more than ± 0.03 dB from a level of -10 dBm0 or 0 dBm0 respectively. In accordance with Recommendation O.6, the specified frequency tolerance should be 1020 Hz + 2 Hz, -7 Hz. If a sequence representing -10 dBm0 is used, the nominal value at the voice frequency outputs should be -10 dBm0.
- A high quality low-complexity algorithm for packet loss concealment with G.711
- A comfort noise payload definition for ITU-T G.711 use in packet-based multimedia communication systems
Links about Paket sizes and framrates
Søg f.exk på: g.711 20ms eller: Packetization g.711 160 80 eller: g711 framerate eller: itu g.711 frame size
- InformIT: Quality of Service Design Overview > QoS Requirements of VoIP
- KIS000796 - Frame length variation for G.711 encoder - Forum Nokia Wiki
- Newport Networks VoIP Bandwidth Calculation
- GRANDSTREAM NETWORKS FAQ – CODEC
- Cisco - Voice Over IP - Per Call Bandwidth Consumption
- Standards and Drafts for RTC
- Recording and Playing back streaming sound in C# on Motorola Q Smartphone
<google>ENGELSK</google>